Display samples When you show samples to customers, fold the shirts neatly, face the embroidery to the customer, and do not fold the embroidery inside. If you need ball head embroidery needles to embroider knitted fabrics, or do not have alloy needles on your hands, you can use 90/14 ball head needles, or use quilting needles with large eyelets. The contour line can't cover the usually bad underlay, but if you try to embroider, it always happens in the same position, then the problem lies in the pattern design.

You can remove the affected part from the tube or replace it with another tube. There are many other squares if you use these trial embroidery. Pre-wash a piece of white cotton cloth a few yards long with water and cut it into a square. You can also use it in your samples. When double-sided tape is used, sporadic glue will remain on the line, which will cause friction and break the line. The needle hole is fluffed. The type of the needle point is incorrect.

Computerized embroidery stones want to increase production capacity and reduce downtime to meet customer requirements and make profits. For light or dark fabrics, spray some magicsizing and set aside for 5-6 minutes until dry. Here are some tips, tricks, and emergency measures to help you prevent embroidery problems, fix errors, save time, save money, and increase satisfaction. When your customers want to be cheaper-when customers pick faults and complain, ask you to lower the price because they found a 'flaw' and they just want the price to be cheaper.

The reason for the broken needle is: the type of embroidery needle does not match the thread and fabric. Wrong stitch or no stitch. The embroidery needle touches the embroidery stretch. Use spray glue to glue the appliqué onto the embroidery patch, use a 'Z' needle to fix the appliqué on the embroidery patch, and then use a flat commercial embroidery machine needle to embroider along the edge of the patch. This means that you need to ship 95-105 see shirts. Use this printout to see if the holes can be covered. Consider packing the shirts individually in a transparent plastic bag. Write the name of the embroiderer on the label and hang it on the clothes. When the machine is started, if the thread is pulled, the embroidery needle may be bent or broken

Megosztás a facebookon